Parameters
Object's Attributes
Each CANopen Object in emDrive inverter has several attributes. Following attributes are related to changing, storing and loading values of objects.
| Attribute | Description |
| Access Type | Defines if the object is readable and/or writable |
| Default Value | Default value is value that the object is set to when setting parameters to factory/manufacturer defaults |
| Read Level | Access level that is required for reading value of object |
| Write Level | Access level that is required for writing value to object |
| Persistent | Defines if the value of object is saved in permanent storage (keeps value after reboot or power cycle) |
Object which have Persistent attribute set to "1" are stored in permanent memory and are therefore called "Parameters".
Parameter Access Level
Each Parameter has attribute for Read and Write access level. To be able to read or write to object Inverter must be unlocked to required level.
There are following Access Levels:
| Level | Name | Description |
| 1 | End User | Object is available to End User without any need to unlock the emDrive |
| 2 | Customer | Objects are available by default. Can be locked with "Customer Key" |
| 3 | Production | Objects only available in production to write production related and calibration objects |
| 4 | Development | Objects are available only during development |
Devices shipped from manufacturer are unlocked to "Customer" level. Customer has the option to lock the device and prevent additional changing of object values from 3th parties.
Access Level CANopen Objects
Objects at index 0x2010 are used for Access Level functionality
- subindex 1 -> "Access_Level__Current" shows current access level that inverter is set to, objects with equal or lower access level can be accessed.
- subindex 2 -> "Access_Level_Key_input" write your key to unlock the device, depending on the key, specific level will be unlocked.
- subindex 3 -> "Access_Level_Customer_Key" writing value to this object will lock the device to "End User" (after reset). The same key must be used to unlock the device to "Customer" level. Remove locking by writing value "0".
Saving and Restoring Parameters
There are several different "sections" where parameters can be saved or restored from.
Parameter Sections
"Current Parameter Values" -> current value of parameter that is in use.
"Manufacturer default values" -> parameter values that are hardcoded into firmware, and can be used to restore device to factory default settings.
"Customer default values" -> Customer or Production can store values that can be used later to restore Parameter values to "Customer defaults".
"Device Parameter values" -> Parameter values stored into permanent memory that are loaded at power up.