Parameters
Object's Attributes
Each CANopen Object in emDrive inverter has several attributes. Following attributes are related to changing, storing and loading values of objects.
| Attribute | Description |
| Access Type | Defines if the object is readable and/or writable |
| Default Value | Default value is value that the object is set to when setting parameters to factory/manufacturer defaults |
| Read Level | Access level that is required for reading value of object |
| Write Level | Access level that is required for writing value to object |
| Persistent | Defines if the value of object is saved in permanent storage (keeps value after reboot or power cycle) |
Object which have Persistent attribute set to "1" are stored in permanent memory and are therefore called "Parameters".
Parameter Access Level
Each Parameter has attribute for Read and Write level. To be able to read or write to object Inverter must be unlocked to required level.
There are following Access Levels:
| Level | Name | Description |
| 1 | End User | Object is available to End User without any need to unlock the emDrive |
| 2 | Customer | Objects are available by default. Can be locked with "Customer Key" |
| 3 | Production | Objects only available in production to write production related and calibration objects |
| 4 | Development | Objects are available only during development |
Access Level CANopen Objects
Objects at index 0x2010 are used for Access Level functionality
- subindex 1 -> "Access_Level__Current" shows current access level that inverter is set to, objects with equal or lower access level can be accessed.
- subindex 2 -> "Access_Level_Key_input" write your key to unlock the device, depending on the key, specific level will be unlocked.
- subindex 3 -> "Access_Level_Customer_Key" writing value to this object will lock the device to "End User" (after reset). The same key must be used to unlock the device to "Customer" level. Remove locking by writing value "0".